Garmin Rino 110 Owner's Manual
  1. Manuals
  2. Brands
  3. Garmin Manuals
  4. Two-Way Radio
  5. RINO 110 - Hiking GPS Receiver
  6. Owner's manual

Garmin Rino 110 Owner's Manual

2-way radio & personal navigator
Hide thumbs Also See for Rino 110:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual and Reference Guide
110
®
2-way radio & personal navigator
®
owner's manual

Advertisement

Table of Contents
loading

Related Manuals for Garmin Rino 110

Summary of Contents for Garmin Rino 110

  • Page 1 ® 2-way radio & personal navigator ® owner’s manual...
  • Page 2 Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements.
  • Page 3 The Quick Start Guide describes the process of setting up your Rino 110 and some basic unit operations to familiarize you with your new Rino 110 right out of the box. The small size of the guide makes it perfect to take with you! This Owner’s Manual describes the Main Pages of the...

  • Page 4: Table Of Contents

    Informational Picture ... 16 GPS Status ... 16 Radio Transmission Status ... 16 Mark Waypoint’s Indicators ... 17 Using the Rino 110 Radio Features ... 18 Peer-to-Peer Positioning ... 18 New Contact Page Overview ... 18 Sending a Location ... 21 Map Page ...22...
  • Page 5 Main Menu Options ... 34 Page Sequence Setup ... 34 Shortcuts Menu ... 35 Waypoints ...36 Creating Waypoints ... 37 Projecting a Waypoint ... 38 Editing a Waypoint ... 38 Find ‘N Go ... 40 Finding a Waypoint ... 41 Finding a Contact ...
  • Page 6 Safety and Product Information ... 93 FCC Compliance Information ... 93 FCC Licensing Information ... 93 Limited Warranty ... 94 Software License Agreement ... 96 Product Registration ... 96 Contact Garmin ... 96 Warnings and Cautions ... 97 Index ...100 Rino 110 Owner’s Manual ®...

  • Page 7: Getting To Know Your Rino 110

    20 tracks with up to 125 points per track. Using MapSource ® (not included), the Rino 110 can display up to 1 MB of a variety of different points (not actual maps), including Rino 110 Owner’s Manual...

  • Page 8: Front Of The Rino 110

    Front of the Rino 110 Power button: • Press and hold to turn the unit On/Off • Press to adjust contrast and backlighting Call button: • Press to send out Call Tone • Sends position when released (if enabled) Talk button: •...

  • Page 9: Back Of The Rino 110

    > ETTING TARTED ACK OF THE Back of the Rino 110 2-way FRS/GMRS Antenna GPS Antenna Belt Clip Connector Mount External Power And Data Connector with Weather cap Headset Connector Battery Compartment D-Ring with Weather cap Battery Compartment Cover Mount Alignment Notches Rino 110 Owner’s Manual...

  • Page 10: Main Page Sequence

    Main Page Sequence All of the information you need to operate the Rino 110 can be found on five default main pages (or display screens). Press and release the Page key to cycle through the Radio Page, Map Page, Navigation Page, Trip Computer, and Main Menu Page.

  • Page 11: Operating The Rino 110

    Operating the Rino 110 For best results, you should initialize the GPS receiver in your Rino 110 unit before you use it the first time. Refer to the “Initializing the Rino 110” section later in this manual for instructions on initializing the unit.

  • Page 12: Status Bar Overview

    Install new batteries or recharge batteries. Using External Power Receiving Radio signal Transmitting Radio signal Backlight On Radio On Peer-To-Peer On/Location Ready to Send Keylock On Alarm Clock On GPS On, Position Ready GPS On, Position Not Ready Rino 110 Owner’s Manual ®...

  • Page 13: Unit Operation

    Initializing the Rino 110 To take full advantage of all of the Rino 110 features, the GPS receiver must be initialized. The initialization process allows the Rino 110 to receive and store satellite information and begin using the satellites for navigation.

  • Page 14: Using My Id And Symbol Fields

    Using My ID and Symbol Fields The My ID field allows you to enter a name and symbol that appears on other Rino units as you communicate with them. You may enter a name using a combination of up to 10 letters, numbers, or spaces.
  • Page 15 To change the user symbol: 1. Using the Thumb Stick, highlight the face symbol to the right of the My ID field. Press the Thumb Stick In to show a list of available face symbols (icons). 2. Move the Thumb Stick Up or Down to scroll through the selections.

  • Page 16: Setting The Channel And Squelch Code

    Setting the Channel and Squelch Code The Rino 110 has a total of 22 channels and 38 squelch codes to select from using the Channel and Code fields. Channels 1–14 are FRS channels and 15–22 are GMRS channels (disabled by default in U.S. units). To communicate with other Rino and FRS/GMRS users, you must be on the same channel and squelch code.
  • Page 17 See the “Appendix” for a table listing all of the 38 Squelch Codes and their frequencies. As you change the main channels, the Rino 110 remembers the last channel/squelch code combination that you were using. For example, you may set the unit channel to 5 and squelch code to 21, then change the main channel to 8 and squelch code to 2.

  • Page 18: Scanning And Monitoring

    (or if you transmit), it stops on that channel/squelch code for a few seconds, then continues scanning. When the Rino 110 is scanning and it receives an incoming signal, the Rino 110 automatically decodes the Squelch Code used by the incoming signal. The Rino 110 then uses that Squelch Code when it transmits back to that unit.
  • Page 19 In. The Radio Page Option Menu provides the following: Setup Radio, Setup Tones, Setup Scanlist, Turn Radio Off/On, and Turn GPS Off/On. Refer to the following pages for explanations of each item in the Radio Page Option Menu.

  • Page 20: Radio Page Option Menu

    Radio Page Option Menu The Radio Page Option Menu allows you to customize aspects of your Rino 110, such as setting up the radio, programming call and ring tones, and setting up a scanlist. Setup Radio The Setup Radio option displays the Radio Setup Page.

  • Page 21: Setup Tones

    Headset Type—allows you to choose which accessory headset or microphone you are using with the unit, or have the unit automatically detect the type. If you use more than one type of headset or microphone, you need to set the unit to Ask When Detected before changing accessories.

  • Page 22: Setup Scanlist

    Informational Picture The Informational Picture on the bottom half of the Radio Page features Garmin’s Mr. Mark Waypoint figure showing current GPS and radio status, and radio actions. As you operate the unit, the graphics change depending on what actions you are taking and the unit settings.

  • Page 23: Mark Waypoint's Indicators

    Mark Waypoint’s Indicators The Mark Waypoint figure displays several different icons, depending on what you are doing. See the illustrations for more information. GPS and FRS/GMRS Radio On; Ready to transmit Position GPS and FRS/GMRS Radio On; Ready to transmit Position;...

  • Page 24: Using The Rino 110 Radio Features

    This section reviews some of the advanced radio features. Peer-to-Peer Positioning The Rino 110’s most unique feature is being able to send its location to another Rino, which is called Peer-to-Peer positioning. With peer-to-peer positioning enabled (see page 14) and a GPS position (see the “Initializing the...
  • Page 25 The Rino 110 can manage up to 50 contacts at any time. Each time you receive a signal from a contact, your map is updated showing their new position. A Track Log of their movement is created and shown on your map (see the “Track Logs”...
  • Page 26 To review a contact and contact details: 1. From the Map Page, highlight the desired contact on the Contact Bar and press the Thumb Stick In. As you highlight the contacts on the Contact Bar, the Map Page centers the map on that contact and display its name, direction, and distance near the top of the screen.

  • Page 27: Sending A Location

    Sending a Location Another handy feature is the ability to send a specific location to other Rino users. This comes in handy when you are trying to round up the group or you want to meet at a specific location. You may send any point found from the Find ‘N Go menu.

  • Page 28: Map Page

    In many instances the map displays an Accuracy Circle surrounding the Position Icon. The Rino 110 uses both map resolution and GPS accuracy in defining your location to a point within the circle. The smaller the circle, the more accurate your location.
  • Page 29 To view a Contact from the Map Page: 1. Highlight the desired Contact icon using the Thumb Stick. As you highlight the contact on the Contact Bar, the Map Page centers the map on that contact and displays its name, direction, and distance near the top of the screen.

  • Page 30: Map Page Options

    Map Page Options Map Page options allow a variety of operating and custom features for your Rino 110. The Map Page options are listed below. Highlight an option then press the Thumb Stick In to select. Map Page Option Menu Pan Map—allows you to move the Panning Arrow (Map...

  • Page 31: Using The Pan Map Option

    2. Select Find ‘N Go to display items. Select the category you wish to search (waypoints, contacts, etc.), then select Near Map Pointer from the pop- up list. The Rino 110 then searches for the items nearest the location of the map pointer instead of your actual location.

  • Page 32: Programming The Data Fields

    Trip Time—Movg. Trip Time—Total Turn Vertical Speed Trip Computer Only Location (lat/lon) Location (selected) Rino Current Destination Current ETE Final Distance GPS Accuracy Moving Avg. Speed Overall Avg. Speed Sunrise To Course Trip Time—Stopped Velocity Made Good 110 Owner’s Manual ®...

  • Page 33: Setting Up The Map

    Setting up the Map Setup Map displays the five Map Setup Pages, each accessed by an on-screen button. Sub-Page Buttons Setup Items General Setup Lines Setup Points Setup Text Setup Map Data Setup Options To use Map Setup options: 1. Select Setup Map from the Option Menu then press the Thumb Stick In to display the Map Setup Page.

  • Page 34: Tracks Setup

    Tracks Setup Saved Tracks and Track Log—scale options; Off, Auto, or 20 ft.–500 miles, sets the maximum scale at which the feature should appear on the screen. Some types of data display only at certain zoom scales. Goto Line—Bearing or Course. Map Features Setup Points of Interest and Waypoints—Off, Auto, or 20 feet to 500 miles, sets the maximum scale at which that...

  • Page 35: Navigation Page

    Page” section listed in the “Data Field Options” heading and definitions may be found in the “Appendix.” When you are moving, the heading of the Compass Ring is controlled by the GPS receiver (based upon settings customized in the Heading Setup Page). Rino 110 Owner’s Manual...
  • Page 36 While you are navigating a route, the pointer indicates the direction (a bent arrow) of the turn to the next point in the route as well as the direction to the current point when you get within 15 seconds Estimated Time of Arrival of the current point.

  • Page 37: Navigation Page Options

    Navigation Page Options Stop Navigation—cancels navigation. “Grayed out” or disabled unless you are navigating on a Goto, Track, or Route. Bearing Pointer/Course Pointer—toggles between Bearing (always directed at destination) and Course (distinctive with dots across center of compass ring, shows amount of correction needed to be back on course.).

  • Page 38: Trip Computer Page

    Trip Computer Page The Trip Computer Page by default displays up to seven different types of navigation data. Choose Big Numbers to display two (2) large data fields. Trip Computer Page, Trip Computer Page, Small Numbers Big Numbers Each data field is selectable and can contain one of many data information options.

  • Page 39: Main Menu Page

    Using the Main Menu The Main Menu allows access to many features and pages in the Rino 110. Please refer to the “Features” section for a complete description of the items accessed through the Main Menu.

  • Page 40: Main Menu Options

    Alarm Clock—provides a settable 24-hour alarm clock. Calculator—provides a calculator feature available in two forms: Standard or Scientific. Stopwatch Page—allows you to use the unit as a stopwatch, including a lap timer. Sun & Moon Page—shows a graphic display of both the Sun &...

  • Page 41: Shortcuts Menu

    ‘N Go Page, you can find waypoints, contacts, and cities. You may also find Points of Interest if MapSource data is loaded into the Rino 110. Enable Keylock—enables keylock so keys are not inadvertently pushed. Press and hold the Page key to...

  • Page 42: Waypoints

    Menu are two common pages for creating and editing waypoint. You can also create a waypoint using the Map Page. The Rino 110 holds up to 500 waypoints. The Mark Waypoint Page allows you to mark and record any location as a waypoint and appears with a graphic name block that displays the assigned number for that waypoint and a waypoint symbol.

  • Page 43: Creating Waypoints

    Creating Waypoints There are many ways to create a waypoint. You can use any of the methods listed below. To create a waypoint for a map feature: 1. With the Pan Map feature active, move the panning arrow (map pointer) to the map item you want and highlight it.

  • Page 44: Projecting A Waypoint

    Projecting a Waypoint Projecting a waypoint from any map item (another waypoint, etc.) allows you to establish a new waypoint on a bearing and distance projected from that map item. To project a waypoint: 1. Select a map item from the Find ‘N Go Menu. 2.
  • Page 45 To delete a waypoint or contact: 1. Use the Find ‘N Go feature to display the point. 2. Highlight the Delete button and then press the Thumb Stick In. Confirm the deletion. Deleting a waypoint To move a waypoint by dragging it: 1.

  • Page 46: Find 'N Go

    Find ‘N Go The Find ‘N Go Menu allows you to find stored locations (waypoints) and cities. They can be found by name or by those nearest to your current location. If you are using certain MapSource data, the list of find locations is expanded to include Points of Interest.

  • Page 47: Finding A Waypoint

    Finding a Waypoint Waypoints that you have created and stored in the Rino 110 can be found by selecting the Waypoint option from the Find ‘N Go Menu. You can find a waypoint from the list of waypoints using the By Name or Nearest options as explained on the previous page.
  • Page 48 To find a waypoint by name: 1. Use the Thumb Stick to select Waypoint from the Find ‘N Go Menu. Press the Thumb Stick In to select By Name from the pop-up menu. Press the Thumb Stick In to display the Waypoints List. Find ‘N Go Menu 2.

  • Page 49: Finding A Contact

    Finding a Contact Contacts that you have received in the Rino 110 can be found by selecting the Contacts option from the Find ‘N Go Menu. Contact List To find a contact: 1. From the Find ‘N Go Menu, highlight Contacts and press the Thumb Stick In.

  • Page 50: Finding A City

    Finding a City Cities can be found by selecting the Cities option of the Find ‘N Go Menu, selecting the city from the list of Nearest or By Name, and then displaying the City Information Page. The City Information for the selected city displays, including the city name, the size by population, and distance from your location.

  • Page 51: Finding A Point Of Interest

    Finding a Point of Interest You can use the Find Points of Interest option to locate a nearby restaurant, lodging, landmark, public building, park, etc. However, you must have transferred a MapSource Points of Interest (POI) to the unit map database.
  • Page 52 To find a point of interest: 1. Use the Thumb Stick to highlight Points of Interest and then press it In to display the Points of Interest Categories List. 2. Use the Thumb Stick to select the desired category and then press it In to display the Types List.

  • Page 53: Finding A Last Found Place

    Finding a Last Found Place You can use the Recently Found Places option to locate Points of Interest, Cities, Waypoints or Contacts, Intersections, and other locations you have recently retrieved. The process for finding recent points from the Find ‘N Go list is the same as finding a regular waypoint. To find a Last Found Place: 1.

  • Page 54: Using A Goto

    Using a Goto The Goto function allows you to create a direct route to a destination (waypoint, city, or point of interest). Once you have accessed the Information Page for an item, use the Goto button at the bottom of the page to initiate travel, using the Map and Navigation Pages for guidance.

  • Page 55: Route Page

    Route navigation allows you to create a sequence of intermediate waypoints that leads you to your final destination. The Rino 110 stores 20 routes, each with up to 50 waypoints. A route can be created and modified from the Route Page, and waypoints can be added to a route from the Find ‘N Go Menu.

  • Page 56: Editing A Route

    To add a Find ‘N Go Menu item to a route: 1. Select an item from the Find ‘N Go Menu and display its Information Page. If a contact is used in a route, the route changes as the contact’s position is updated, or it may be saved as a Waypoint to serve as a stationary point.
  • Page 57 To copy the route: 1. From the Route Page, select the on-screen page Option Menu button and press the Thumb Stick In to access the Option Menu. 2. Highlight the Copy Route option and then press the Thumb Stick In to copy. The copied route displays on the Route Page and is named the same but followed by the numeral 1 (one).
  • Page 58 Route point review options 3. With the new point highlighted, press the Thumb Stick In to display the Information Page for the new point and then select the on-screen OK button to add it the route. To remove a point from the route list: 1.

  • Page 59: Adding Or Editing From The Route Map Page

    Adding or Editing from the Route Map Page You can use the panning arrow with the Route Map Page displayed to add or edit route waypoints. To add a point at either end of a route: 1. Select the Route from the list of routes. Press the Thumb Stick In to display the Route Page.

  • Page 60: Navigating A Route

    To review or remove a route point: 1. Select the Route from the list of routes. Press the Thumb Stick In to display the Route Page. 2. Use the Thumb Stick to highlight Map and press In to display the route on the map. 3.

  • Page 61: Stopping Navigation

    Stopping Navigation To stop navigation, highlight the Stop Navigation option on either the Navigation or Map Page’s Option Menu or select the Stop button on the Route Page. Data Fields for the Route Page When navigating a Route, the data displayed in the data fields on the Route Page may be customized to provide useful navigation information.

  • Page 62: Tracks Page

    Tracks Page The Rino 110 draws an electronic bread crumb trail on the Map Page as you travel along. This bread crumb trail is the Track Log. The Track Log contains information about points along its path, including time and position.

  • Page 63: Using The Tracback Feature

    (or another Rino user’s path) without marking any waypoints. When you are ready to return to where you started, the Rino 110 takes you back by following the Track Log that you left behind. You can save a total of 20 tracks in the unit memory. The Track Log starts recording as soon as the unit gets a satellite location fix and the Track Log feature is turned on.

  • Page 64: Setting Up The Track Log

    To use the TracBack feature: 1. Highlight the Tracback button on the Tracks Page and press the Thumb Stick In. The Tracback Menu options (To Beginning and To End) are displayed. 2. Highlight the desired option and press the Thumb Stick In to enable.

  • Page 65: Proximity Page

    Proximity Page The Proximity Page lets you define an alarm circle around a stored waypoint/contact position, and can be used to help you avoid dangerous areas or to alert you when you have strayed too far away from other Rino users. Up to ten waypoints may be listed, with a maximum alarm radius of 99.99 nautical or statute miles or kilometers.

  • Page 66: Satellite Page

    Satellite Page The Satellite Page provides a picture of satellite signal tracking, tells you when the unit is ready for navigation, and shows your location coordinates. To access the Satellite Page: 1. Press the Page key or the Menu icon the Main Menu.

  • Page 67: Waas

    WAAS satellite shown in the skyview. To learn more about the WAAS System, refer to the Federal Aviation Administration Web site (http://gps.faa.gov/). Because the Rino 110 relies on satellite signals to provide you with navigational guidance, the unit’s view of the sky...

  • Page 68: Satellite Page Options

    2. Use the Thumb Stick to highlight the Use With GPS Off option and then press it In. The Rino 110 stops tracking satellites and cannot be used for navigation. However, the next time you turn the unit on, it returns to Normal GPS operation.

  • Page 69: Setup Pages

    Setup Pages The Setup Pages allow you to customize the Rino 110 to your personal preferences. You can choose time settings, units of measure, display backlighting and contrast settings, heading measurement, interface options and system operating mode. By highlighting the icons on the Setup Menu and then pressing the Thumb Stick In, you can display the Setup Page for each of the menu items.

  • Page 70: Units Setup Page

    Time Zone—can be set to one of the eight US Time Zones or 24 International Time Zones (nearest city or geographical region). Select Other so you can enter the UTC Time Offset. Daylight Savings Time—can be turned On or Off or set to Automatic.

  • Page 71: Loran Td Format

    fields, highlight the field, and press the Thumb Stick In. When done, highlight Save and press In. For more information on Loran TDs, you may download Garmin’s Loran TD Position Format Handbook from the Garmin Web site at http://www.garmin.com/support/ userManual.jsp.

  • Page 72: Display Setup Page

    Every map is based on a map datum (a reference model of the earth’s shape) and is usually listed in the title block of the map. If you are comparing GPS coordinates to a paper map, chart, or other reference, the map datum in this field must match the horizontal map...

  • Page 73: Heading Setup Page

    To access the Display Setup Page: 1. Press the Page key or the Menu icon the Main Menu. 2. In the Main Menu, scroll down and select Setup. 3. Select the Display icon to open the Display Setup Page. Display Setup Page To set the backlighting timeout: 1.

  • Page 74: Interface Setup Page

    NMEA devices, a DGPS beacon receiver, a personal computer, etc. See the “Appendix” for using the Rino 110 with MapSource. To access the Interface Setup Page: 1. Press the Page key or the Menu icon the Main Menu.
  • Page 75 None—provides no interfacing capabilities. Rino 110 Owner’s Manual ® If Garmin DGPS or RTCM In/NMEA Out format is selected, additional fields are provided to control a Garmin differential beacon receiver (e.g. GBR 23) directly from your unit. Tuning is automatic with Scan...

  • Page 76: System Setup Page

    Unit I.D. Number. Software updates and instructions for downloading are available from the Garmin Web site (www.garmin.com). Choose one of the four GPS options other than Normal to significantly save battery power.

  • Page 77: Calendar

    Calendar This feature provides you with a monthly calendar with programmable reference notes. You can display one monthly calendar at a time and add reference notes using the data entry keypad. Days that are shaded have notes added. You can create reference notes for multiple months and for months in years yet to come.
  • Page 78 To edit or delete a note: 1. To edit or delete a note previously created, highlight the date and press the Thumb Stick In. 2. Select Edit Note, or Delete Note, from the pop-up menu. To complete the deletion of the note, press the Thumb Stick In when Yes is highlighted in the pop-up window.

  • Page 79: Alarm Clock

    Alarm Clock This feature provides an alarm for the system clock. Enter a time in the time field and turn the alarm on and off from the control field menu. Remember to enter alarm times in the same time format (UTC or local) you are using for your system.

  • Page 80: Calculator

    The memory is cleared either manually or when you turn off the Rino 110. To access the Calculator: 1. Press the Page key or the Menu icon the Main Menu.

  • Page 81: Stopwatch

    Stopwatch This feature allows you to use the unit as a stopwatch, including using it as a lap timer. You may also have the unit record the lap time based on distance. For example, if you set the lap distance to one mile, the unit records the time it takes you to travel one mile.

  • Page 82: Sun & Moon

    Sun & Moon This feature provides you with a graphic display of both sun and moon positioning for a certain date, time and location with times for sunrise, sunset, moonrise, and moonset. To access the Sun & Moon Page: 1. Press the Page key or the Menu icon the Main Menu.

  • Page 83: Hunt & Fish

    Hunt & Fish This feature provides you with a listing of best times for hunting and fishing for a chosen location and date. To access the Hunt & Fish Page: 1. Press the Page key or the Menu icon the Main Menu. 2.

  • Page 84: Area Calculator

    2. In the Main Menu, scroll down and select the Area Calculator icon. To calculate the area: 1. Be sure the Rino 110 has a GPS fix. 2. Press Start when you are ready to begin. 3. Begin walking or traveling the perimeter (edge) of the area you want to measure.

  • Page 85: Games

    Games The Games Page includes Memory Race, Waypoint Bomber, Clothesline, and Assimilation. Highlight the appropriate icon and then press the Thumb Stick In to play the desired game. Brief instructions are displayed when you start each game. All players must be on the same channel/squelch code to play.

  • Page 86: Clothesline

    Either have a timed game with the winner being the one with the least amount of hits on their radio, or play until someone gets a specified number of hits (that person loses). Hint: mark stationary objects such as trees and poles, and drop a bomb when an opposing player is near that object! Adjust the rules to your liking.

  • Page 87: Specifications

    Approx. 45 seconds (cold start) Approx. 5 minutes (First Time/AutoLocate Update Rate: 1/second, continuous GPS Accuracy: <15 meters (49 ft) RMS, 95% typical DGPS (USGC) Accuracy: 3–5 meters (10–16 ft), 95% typical with DGPS corrections DGPS (WAAS) Accuracy: <3 meters (10 ft), 95% typical with DGPS corrections Velocity Accuracy: 0.05 meter/sec steady state...

  • Page 88: Radio

    With optional Garmin Differential Beacon Receiver Input (such as Garmin GBR 23). The temperature rating for the Rino 110 may exceed the usable range of some batteries. Alkaline batteries can rupture at high temperatures. External power can only be applied using the Garmin Auto Power Adapter or PC Interface Cable with Auto Power Adapter.

  • Page 89: Accessories

    Accessories To obtain accessories, see your local dealer or visit the Garmin Web site at www.garmin.com. 12-Volt Adapter Cable—provides unit power from an automobile cigarette lighter. 2.5 to 3.5 mm Jack Adapter—allows you to use 3rd party headsets with your Rino unit.

  • Page 90: Transferring Mapsource Data

    Find features. The Rino 110 accepts up to 1 MB of map data from the MapSource Points of Interest. It is not possible to transfer 3rd party maps into Garmin products.

  • Page 91: What Is Frs

    What is FRS? FRS, or Family Radio Service, is a UHF radio frequency band allocated by the FCC for general public use. The operating frequency ranges from 462.5625 to 467.7125 MHz, with a maximum transmitting power of one half watt. FRS radios are small and lightweight, making them ideally suited for outdoor activities.

  • Page 92: Frs Limitations

    Channel scan allows your FRS radio to scan all FRS frequencies for signals. After scanning briefly to see what channels other users are on, simply set your FRS radios to an unused channel and enjoy less interference. FRS Limitations If you are operating in an urban environment or in varying terrain such as canyons or mountains, some features act as obstructions limiting the maximum reception range of your FRS radio.

  • Page 93: Gps Troubleshooting Guide

    Move to a location with a clear view and point the unit antenna in the direction of the satellite. Set system GPS to Normal and interface to other than RTCM. Or simply turn off WAAS. Wait 10–20 minutes for the initial collection, then 1–2 minutes afterwards.

  • Page 94: Radio Troubleshooting Guide

    Use the same Squelch Code (1-38) as the other party or use Scan to find what Squelch Code they are on. Both radios need to have this feature set the same (Rino 110 units do not have voice scramble).

  • Page 95: Frequency Charts

    Frequency Charts Channel # Transmit Frequency (MHz) 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 Code Frequency Code 71.9 74.4 79.7 82.5 85.4 88.5 91.5 94.8 Rino 110 Owner’s Manual ® Channel # Transmit Frequency 467.6625 467.6875 467.7125 15 (GMRS) 462.5500...

  • Page 96: Appendix

    Final ETA—the estimated time of day you will reach your final destination. Final ETE—the estimated time needed to reach your final destination. GPS Accuracy—the estimated accuracy of the GPS signal. Heading—your moving direction. Location (lat/lon)—your current GPS position. (Trip Computer Page Only.) Location (selected)—the lat/lon of point defined on map.
  • Page 97 Speed—display rate of travel in miles per hour, kilometers per hour, or nautical miles per hour. Sunrise—the time at which the sun rises on this day. Sunset—the time at which the sun sets on this day. Time of Day—The time for the selected time zone. To Course—the compass direction you must go in order to get back to the original course.

  • Page 98: Interface Information

    /or a second GPS receiver. The NMEA 0183 version 3.0 interface format is supported by the Rino 110 and enables the unit to drive up to three NMEA devices. NMEA 0183 Version 3.0 Approved Sentences:...

  • Page 99: Safety And Product Information

    Safety and Product Information FCC Compliance Information The Rino 110 complies with Part 15 of the FCC regulations and with Canadian RSS-210 and ICES-003 for Class B digital devices. Operation of this device is subject to the following conditions: (1)

  • Page 100: Limited Warranty

    FRS or GMRS use. Limited Warranty This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will at its sole option repair or replace any components that fail in normal use.
  • Page 101 Garmin dealer for repairs. The Rino 110 is fastened shut with screws. Any attempt to open the case to change or modify the unit in any way will void your...

  • Page 102: Software License Agreement

    America. Product Registration Help us better support you by completing our online registration today! Have the serial number of your Rino 110 handy and connect to our Web site (http://www.garmin.com). Look for the Product Registration link on our Home page.

  • Page 103: Warnings And Cautions

    Use the Rino 110 at your own risk. To reduce the risk of unsafe operation, carefully review and understand all aspects of this Owner’s Manual—and thoroughly practice operation using the...
  • Page 104 safety standards previously set by both U.S. and international standards bodies: American National Standards Institute (ANSI) IEEE. C95.1-1992; National Council on Radiation Protection and Measurements (NCRP) Report 86; International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996. Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature.
  • Page 105 Turn your radio OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles—RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles.

  • Page 106: Index

    Point of Interest 45 Find ‘N Go 40, 48, 50 Fishing information 77 FRS 1, 7, 10, 85, 89 51, 70 Games 79 Garmin sentences 92 General Mobile Radio Service 1. also GMRS GMRS 1, 7, 10, 14, 85 Goto 41, 42, 43, 44, 45, 48...
  • Page 107 Mark Waypoint 16 Mark Waypoint Page 36 Keylock 5, 35 Measure Distance 24, 28 Message Beep 70 Lap 75 Microphone 15 Last Found Place 47 Monitor Channels 12 License Agreement 96 Move a Waypoint 39 Lock My ID 8 Buttons/Keys 5, 35 LORAN TD Format 65 Name 8 Navigate 30, 54...
  • Page 108 Shortcut Menu 5, 35 Satellite Fix 7 Show... 24 Satellite Information 7 Show Data Fields 31 Satellite Page 59 Signal Strength 60 GPS Off 61 Size 81 Options 62 Sky View 60 Sky View 60 Specifications 81 Save as a Waypoint 44, 46...
  • Page 110 For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin web site at www.garmin.com. © Copyright 2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 Street, Olathe, Kansas 66062, U.S.A.

Table of Contents