Operating The Rino 130 - Garmin Rino 130 Owner's Manual

Operating the Rino 130

For best results, you should initialize the GPS receiver in your Rino 130 unit before you use
it the first time. See page 5 for instructions on initializing the unit. For most accurate results,
the compass and altimeter should also be calibrated. Refer to the Calibrating the Compass and
Calibrating the Altimeter sections for complete information.
The Rino 130 is programmed to provide "pop-up" messages concerning operational charac-
teristics and conditions. Press the
the current feature.
To use the THUMB STICK:
• Press IN to enter highlighted options and to confirm messages
• Move UP, DOWN, RIGHT or LEFT to move through lists, highlight fields, on-screen buttons,
icons, enter data, or move the map panning arrow
• Press IN and hold to display Shortcuts Menu.
To use the page Option Menu:
1. Highlight the Option Menu on-screen button
press the
THUMB STICK
2. Highlight the desired menu option and press the
3. To close without making a selection, move the
To lock/unlock the buttons:
1. Press and hold the
THUMB STICK
Keylock' and press the
THUMB STICK
2. To unlock, press and hold the
seconds).
THUMB STICK IN to acknowledge a message and return to
at the top of the display screen and then
IN to open the menu.
THUMB STICK
THUMB STICK
IN to access the Shortcuts Menu. Highlight 'Enable
IN. The button is not locked.
TALK
PAGE button until 'Keylock Disabled' is displayed (about 5
IN to activate the option.
to the RIGHT.
Overview
Rino 130 Overview
Hold the Page button to
release the keylock.
3