Parts Identification - Sony DWTB01/E1424 Operating Instructions Manual

Selectable RF output power:
1 mW, 10 mW, and 50 mW
For details, see "Setting the RF output power (RF
POWER)" on page 19.
Power sleep mode
For details, see "Power save setting (POWER
SAVE)" on page 20.
Digital low-cut filter
For details, see "Low-cut filter setting (LCF)" on
page 20.
Easy-to-see, full dot-matrix
OLED (Organic Light-Emitting
Diode) Display
The quick response of the OLED display
enables real-time operating conditions to be
displayed clearly and accurately.
Parts
Identification
a Antenna
b AF (audio input level) /PEAK
indicator
Lights up green when the signal input is
stronger than the reference level.
Lights up red when the signal input is 3 dB
below the level at which distortion begins.
c POWER indicator
Lights up green when the transmitter is
turned on. When the battery is exhausted,
the indicator starts flashing.
d Audio input connector (SMC9-4S)
Connects the output plug from the optional
lavalier microphone.
This connector also accepts the input from
another wired microphone connected
through the supplied microphone cable, or
the audio output from a mixer, etc.

Parts Identification

7