Parts Identification - Sony DWT-B01 Operating Instructions Manual

Parts
identification
a Antenna
b
AF (audio input level) /PEAK
indicator
Lights up green when the signal input is
stronger than the reference level.
Lights up red when the signal input is 3 dB
below the level at which distortion begins.
c POWER indicator
Lights up green when the transmitter is
turned on. When the battery is exhausted,
the indicator starts flashing.
d Audio input connector (SMC9-4S)
Connects the output plug from the optional
lavalier microphone.
This connector also accepts the input from
another wired microphone connected
through the supplied microphone cable, or
the audio output from a mixer, etc.
12

Parts identification

To connect a microphone
Microphone (optional)
To secure the microphone cable
connection, be sure to turn and lock
the connector cover.
e
+ or – button
Selects functions or values shown on the
display.
Holding down the – button while switching
on the transmitter activates the pairing
operation for the wireless remote control
function.
f POWER switch
Turns the transmitter ON or OFF.
g Battery compartment
Accommodates two LR6 (size AA) alkaline
batteries.
For details on how to insert the batteries, see
"Power supply" on page 14.
h SET button
Adjusts displayed function settings and
enters the value.
Holding down the SET button while
switching on the power turns the transmitter
on without sending a signal.
i USB connector (Micro USB)
Use this connector to connect an optional
USB keyboard to carry out menu functions