Power Supply; Installing The Batteries - Sony DWTB01/E1424 Operating Instructions Manual

F POWER switch lock indicator
Indicates that the POWER switch is locked,
preventing the transmitter from being
accidentally turned off or on.
For details, see "Locking the POWER switch
(POWER SW LOCK)" on page 21.
G Cross Remote condition indication
Indicates the signal transmission condition
of the wireless remote control function (4
levels).
: Good transmission
: Somewhat good transmission
: Somewhat poor transmission
: Poor transmission
: Unable to communicate with paired
receiver
When the wireless remote control function
is off, this indication does not appear.
H Battery indication
Shows the battery condition.
For details, see "Battery indication" on page 9.
I Menu display section
The status of 17 different functions are
displayed here. To select the function, press
the + or – button repeatedly.
For details, See "Setting Menus" on page 18.

Power Supply

The transmitter can operate on two LR6
(size AA) alkaline batteries continuously
for about 5 hours at 25°C (77°F).

Installing the batteries

1
Squeeze the battery-holder tabs inward
(in the direction of the arrows) and
slide out the battery holder.
2
Insert new batteries, making sure the
polarities are correct, and then return
the battery holder to its original
position.
Battery indication
The power status is indicated by eight level
indications.
Replace both batteries when the battery
indication starts to flash.
Power Supply 9