Option Menu - Planar PS Series User Manual

Option Menu

Option
Name Description
Displays the input image in its original aspect ratio (when Original is selected)
Aspect ratio or forces the display to fill the input image on the entire display area (when Full
is selected).
• ON/OFF: Turns on or off the PIP function.
• Main Input: Sets an input source for the main picture.
• Sub Input: Sets an input source for the sub picture.
• PIP Size: Changes the size of the sub picture.
• PIP Position: Changes the position of the sub picture.
PIP (Picture in
Picture) Notes:
• This feature is not available for AV and S-Video inputs.
• PIP is not available for all signal source combinations. See "Supported
• In PIP mode, only sounds from the Main Input picture will be available.
Video Source Sets the video input source.
Auto Adjustment Automatically optimizes image display for the VGA input.
Clock Frequency Adjusts the clock frequency of the VGA or YPbPr input image.
Phase Adjusts the phase of the VGA or YPbPr input image.
H Position Adjusts the horizontal position of the VGA input image.
V Position Adjusts the vertical position of the VGA input image.
Ambient Light
Adjusts the ambient light sensitivity around the display.
Sensor
Auto Detection Automatically detects available input sources.
When turned on, Input Resolution, Aspect ratio, PIP, Clock Frequency, Phase, H
Position, V Position, Overscan and Display Wall will be disabled to optimize
Touch Feature
touch performance.
Note: This feature is only available for VGA, DVI and HDMI inputs.
Note: The adjustment of the Clock Frequency, Phase, H Position and V Position settings is
only required when the Auto Adjustment function does not work perfectly on certain input
signals.
Aspect ratio
PIP
Video Source
Auto Adjustment
Clock Frequency
Phase
H Position
V Position
Ambient Light Sensor
Auto Detection
Touch Feature
:Move
Enter
PIP Input Signal Combination" on page 32 for more information on
supported combinations.
The OSD (On-Screen Display) Menu
Full
YPbPr
16
22
OFF
ON
OFF
Exit
:Input :Exit
27