Garmin Trail Guide Owner's Manual page 32

b o > p
asIc peratIon lannInG and
To avoid an area:
E
1. Press and hold MENU to open the Route Options menu.
N
2. Highlight Avoidances, and press OK.
3. Highlight the Add... button, and press OK.
4. Highlight Area Avoidance, and press OK. A map appears,
enabling you to mark a start point.
5. Use the Rocker key to move the map pointer to the first
corner of the area you want to avoid, and press OK. A blue
push pin marks the start point.
6. Use the Rocker key to move the map pointer to the far
corner of the area you
want to avoid, and press
OK. You have drawn a
dark rectangle around the
area you want to avoid.
7. A map of the avoided area
appears. Press OK.
The Avoidances page, shown to
the right, lists the avoided area with a default name (Area 000).

m r
odIfyInG outes
After you enter the avoid areas and roads, your Trail Guide
avoids these roads/areas unless no other roads are available, until
you remove them from the Custom Avoidances list, or until you
uncheck them.
To uncheck an avoidance, select the check box to the left of the
avoidance name, and press OK. A checked box indicates that the
road/area will be avoided.
Uncheck the
box to the
left of the
avoidance to
deactivate it.
Avoidances Page
To change the name of an avoidance, select the A
on-screen keyboard to create a new name. Select the clock
choose the date that you want the avoidance to expire. Select the
red to permanently delete the avoidance.
A
Clock
Red X
and use the
to
Trail Guide Owner's Manual
™