Avoiding Roads And Areas - Garmin Trail Guide Owner's Manual

Avoiding Roads and Areas

You can avoid areas and certain road types on your route. For
example, if an area of roads is usually highly congested, you can
add that area to your Avoid List.
To add an avoidance to your route:
1. Press and hold MENU to open the Route Options menu.
2. Highlight Avoidances, and press OK.
3. Highlight the maneuver or road type you want to avoid, and
press OK. The Trail Guide avoids all roads types that have
a check mark in the Avoid... box.
Avoidances Page
Trail Guide Owner's Manual
™
b o
asIc peratIon
To avoid a road:
1. Press and hold MENU to open the Route Options menu.
2. Highlight Avoidances, and press OK.
3. Highlight the Add... button, and press OK.
4. Highlight Road Avoidance, and press OK to select a street
to avoid on your routes. A map appears, enabling you to
mark a start point on a road.
5. Use the Rocker key to move the map pointer to the
beginning point of the road you want to avoid, and press
OK. A blue push pin marks the start point.
6. Use the Rocker key to move the map pointer to the end of
the road you want to avoid, and press OK.
7. A map of the avoided road appears. Press OK.
The Avoidances page, shown to the left, lists the avoided road with
a default name (the street names).
> p m r
lannInG and odIfyInG outes

E
N