Turning The Trail Guide On And Off - Garmin Trail Guide Owner's Manual

Turning the Trail Guide On and Off

Press and hold the Power key on the front of the unit to turn
it on or off. When turned on, the Welcome page appears briefly,
followed by a Safe Driving Warning Message. Press OK to
acknowledge the message, or wait briefly until the Map page
appears. Your Trail Guide automatically starts searching for
satellite signals to find your current location.
Turning off Satellite Reception for Indoor Use
You can set your Trail Guide to indoor use, which stops satellite
reception and conserves battery power. Thoroughly familiarize
yourself with the routing features of the Trail Guide by
simulating routes.
Trail Guide Owner's Manual
™
G s > t
ettInG tarted urnInG the
To turn off satellite reception:
1. Press PAGE to open the Map page.
2. Press MENU.
3. Highlight Use Indoors, and press OK. GPS is disabled.
To turn on satellite reception:
1. Press PAGE to open the Map page.
2. Press MENU.
3. Highlight Acquire Satellites, and press OK. GPS is
enabled, and your Trail Guide begins to acquire satellite
signals.
t G o o
raIl uIde n and ff
E
N