Kuppersbusch EEBG 6400.8 MX Technical Specifications page 13

A
3 The inside glass will become loose. Remove
it.
Caution
Be very careful when removing the inner glass,
as the oven door will close.
4 Clean the inner glass and the outer door
interior surface.
5 Return the glass supports to the upper door
slots (B).
C
B
6 Turn the glass towards the door (C).
7 Attach the glass to the door again by pushing
the two lower supports (D) with both hands
while pushing the glass towards the door (E).
E
D
36
Changing the Oven Light Bulb
Caution
Make sure the oven is unplugged before
proceeding to change the bulb.
• Detach the chrome supports by loosening the
screw (E).
E
• Release the bulb-holder glass cover with a
tool.
• Change the bulb.
• Reassemble the glass cover and ensure that
everything fits in the correct position.
The replacement bulb must be resistant to
temperatures up to 300 o C. Order one from
Technical.
Changing the Bottom Oven Cavity
Service.
Light Bulb
Caution
Make sure the oven is unplugged before
proceeding to change the bulb.
• Unscrew the bulb-holder glass cover.
• Replace the bulb and reassemble the glass
cover.
The replacement bulb must be resistant to
temperatures up to 300 o C. Order one from
Technical Service.
Removing the Collection Tray from
the Bottom Cavity
Caution
Before removing the collection tray, first make
sure that the oven is unplugged and that the
tray is cold.
• Push upwards on the underside of the tray to
remove it.
• In order to put it back in place, rest it over the
shelf runner (A) front ends and push until it
also rests over the rear ends.
A
37