Specifying The Configure Tab Settings; Selecting An Option - Oce cm6520 User Manual

Setting up the fax driver (Windows)
3.7

Specifying the Configure tab settings

Selecting an option

You can specify whether an option is enabled so that the functions of this machine are available from the fax
driver.
Reminder
If the installed options are not set using the Configure tab, the option function cannot be used with the
fax driver. When installing options, be sure to make the proper settings.
1
For Windows 2000/NT 4.0, click the [Start] button, point to "Settings", and then click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click "Printers and Faxes".
– If "Printers and Faxes" does not appear in the Start menu, open the Control Panel from the Start
menu, select "Printers and Other Hardware", and then select "Printers and Faxes".
2
Right-click the "xxxxxxx FAX" icon, and then click "Properties".
3
Click the Configure tab.
4
Select the options to be specified under "Device Option".
5
Select the status of the option that is installed from the "Setting" drop-down list.
Note
If a "Model" is available under "Device Option", select the model to be used.
Click the [Acquire Device Information] button to communicate with this machine and read the status of
the settings specified on this machine. You cannot use this function if you are not connected to or able
to communicate with this machine. The connection can be specified by clicking the [Acquire Settings]
button.
FAX Driver
3
3-17