Table of Contents
Advertisement
4.5 Adjustment Procedure
4.5.1
Setting of analog output signal voltage/current switchover (Pr. 309)
Use Pr. 309 Analog output signal voltage/current switchover to select whether to output the same signal or
different signals from terminal AM0 (voltage output) and terminal AM1(current output).
Pr. 309
Description
Setting
0
Same select signals are output
from the voltage output terminal
(initial
(AM0) and current output
value)
terminal (AM1). The signal set in
Pr. 306 Analog output signal
10
selection is made valid. (The
setting of Pr. 310 is made invalid.)
1
Different select signals are
output from voltage output
terminal (AM0) and current
output terminal (AM1).
11
REMARKS
Analog output means voltage (0 to 10 V) and current (0 to 20mA) output from terminal AM0 and AM1, and output
signal means the monitor signal (refer to page 18) set in Pr. 306 and Pr. 310.
Parameters for Setting
Terminal
AM0
Pr. 306 : Select the output signal.
Pr. 307 : Output signal value for zero analog output
AM1
Pr. 308 : Output signal value for maximum analog output
AM0
Pr. 306 : Select the output signal.
Pr. 307 : Analog output value for zero output signal
AM1
Pr. 308 : Analog output value for maximum output signal
Pr. 310 : Select the output signal.
AM0
Pr. 311 : Output signal value for zero analog output
Pr. 312 : Output signal value for maximum analog output
Pr. 306 : Select the output signal.
AM1
Pr. 307 : Output signal value for zero analog output
Pr. 308 : Output signal value for maximum analog output
Pr. 310 : Select the output signal.
Pr. 311 : Analog output value for zero output signal
AM0
Pr. 312 : Analog output value for maximum output signal
Pr. 306 : Select the output signal.
AM1
Pr. 307 : Analog output value for zero output signal
Pr. 308 : Analog output value for maximum output signal
EXTENSION ANALOG OUTPUT
Parameters
Adjustment
C1 (Pr. 901)
C0 (Pr. 900)
C1 (Pr. 901)
C0 (Pr. 900)
C1 (Pr. 901)
for
Pr. 323
Pr. 324
Pr. 323
Pr. 324
Pr. 323
Pr. 324
4
15
Advertisement
Table of Contents
