Inserting Bobbin - Kenmore Sears 385.12314 Owner's Manual

• Inserting bobbin
[] Place a bobbin in the bobbin case making sure thread
feeds clockwise coming from the bobbin°
[] Draw the thread through the slot of lhe case,
[] Continue to draw the thread under the tension spring and
through the opening,,
Pull out about 4" (lOcm) of thread
[] Holding the latch open, position the bobbin case into the
shuttle and release latch
[] Case should lock into place when the latch is released,
[]
[]
%,....
[]
[]
.)
J
J
[]
22