Bobbin Winding; Removing Bobbin Case - Kenmore Sears 385.12314 Owner's Manual

Bobbin Winding
• Removing bobbin case
Remove the extension table from the machine by pulling it to
the lefL Open the shuttle cover 0 by pulling down the em-
bossed part on the left of the cover,
Raise the needle to its highest position by rotating the
handwheel toward you,
(D Shuttle cover
(_) Bobbin case
To remove the bobbin case(_ from the shuttle, pull open the
latch of the bobbin case. Pull the bobbin case straight out of
the shuttle,
° Bobbin winding
[] Release the clutch by pulling out the handwhee! This
will stop lhe needle from moving while you wind the
bobbin.
[]
[] Drawthread from spool.
[] Guide the thread around the thread guide,
[] Thread through the hole in the bobbin from the inside to
the outside.
[] Put the bobbin on the bobbin winder spindle
[]
[]
[]
[]
18