Print Nvram Contents - Lexmark 7000 Color Jetprinter Service Manual

4092-001

Print NVRAM Contents

This test prints the contents of NVRAM in hexadecimal format.
To run the test:
1. Turn the printer off and place a piece of paper in the manual
feed far enough to activate the EOF sensor.
2. To start the test, press and hold the Paper Feed button while
turning the printer on. Release the button when the printer
completes POST.
The device ID is shown on the right side of the printout.
The following appears below the printout:
•
Code Level
•
Code Date
•
Last Error
•
Page Count
3-6