Error Indicator Table; Power-On Self Test (Post) Sequence - Lexmark 7000 Color Jetprinter Service Manual

4092-001

Error Indicator Table

Number
of
Error
Power
Code
Light
Flashes
7
64
65
6
66 -
78
79 9
2
81
8
83
89 4
5
90
12
92
93 3
10
127
and
up

Power-On Self Test (POST) Sequence

When you turn the printer on it performs a POST. Turn your printer
on and check for a correct POST operation by observing the
following:
1. The power light comes on.
2. The carrier moves over the maintenance station and seals the
printheads.
3. The paper feed gears turn.
4. All motors stop and the power light stays on.
Action
Replace the code module and/or system board.
Replace the code module and/or system board.
Replace the Code Module and/or system board.
Go to the "Transport Service Check" on page
Replace the code module and/or system board.
Go to the "Transport Service Check" on page
Check the carrier and/or replace the system board.
Replace the printhead and/or printhead cable.
Replace the code module and/or system board.
Replace the Code Module and/or system board.
Diagnostic Information 2-2
2-15.
2-15.