Large Outside Gear Removal - Lexmark 7000 Color Jetprinter Service Manual

Service manual

Hide thumbs Also See for 7000 Color Jetprinter:

Table of Contents

4092-001

Large Outside Gear Removal

1. Remove the front cover.

2. Remove the rear cover.

3. Remove the paper load door and manual insert tray.

4. Remove the C-clip from the feed arm assembly and remove the

feed arm assembly.

5. Remove the C-clip from the left side of the pick roll shaft.

6. Pull the pick roll shaft out far enough to remove the large gear.

Note: Gently pull the feed arm guide [A] on the left side frame

forward, then remove the large gear.

4-11

Table of Contents

Do you have a question about the 7000 Color Jetprinter and is the answer not in the manual?