Lexmark 7000 User Manual

Lexmark
7000
Color Jetprinter
1
Unpack your printer
Setup
Paper
diskettes
support
Power
cord
Print cartridges Paper exit tray
1
Remove all tape from the Lexmark 7000
Color Jetprinter .
™
2
Remove the print cartridges packed with
the printer. Do not install until step 7.
Lexmark Technical Support Center
See the printer registration card for the number appropriate
for your country.
P/N 13B0255 E.C. 3B0005
2
Install paper exit tray
Paper exit tray
Tray slot
1 Make sure the printer is on a level
surface.
2
Line up the paper exit tray with the tray
slot underneath the printer.
3
Hold the printer in place and slide the
tray firmly into the tray slot. The tray
clicks into place.
When the tray is properly installed, it slides
easily in the tray slot but cannot be pulled
all the way out of the printer.
Please have the following information available so we may
serve you faster. (Located on the back of the printer)
Machine Type number
Serial number
Date purchased
Store where purchased
3
Install paper support
1
Turn the printer so the back faces you.
Machine type
Serial number
number
2 Hook the bottom of the paper support
under the lip on the back of the printer.
3 Push firmly until it snaps into place.
9/96
4
Connect your printer
Power button
Power
cord
Parallel cable
1 Connect the parallel cable to the
computer and printer. Fasten the metal
clips on the printer to the parallel cable.
Use a parallel cable that supports
bidirectional communication
(IEEE 1284-compatible), such as
Lexmark P/N 1329605.
2
Connect the power cord to the printer and
fasten the metal clips on the printer to the
parallel cable.
3
Plug the power cord into a properly
grounded electrical outlet.
4
Press the power button . The power
light comes on.
5

Load paper

The sheet feeder holds approximately 150
sheets of paper. To load paper:
1
Open the paper load door.
2
Extend the paper exit tray.
3
Insert paper.
4
For different size paper, squeeze the left
paper guide release lever and move to the
correct paper size.
5 Close the paper load door.
For information about loading other types
of paper into the sheet feeder, or using the
manual feeder, see the Online Guide.