4077-20X, 30X
Error Indicator Table
Number
of
Error
Power
Code
Light
Flashes
7
64
65
6
66 -
78
9
79
2
81
8
83
4
89
10
127
and
up
Power-On Self Test (POST) Sequence
When you turn the printer on it performs a POST. Turn your printer
on and check for a correct POST operation by observing the
following:
1. The power light comes on.
2. The carrier moves over the maintenance station and seals the
printheads.
3. The paper feed gears turn.
4. All motors stop and the power light stays on.
If your printer completes POST with no errors, go to the
Tables" on page
action.
If your printer does not complete POST, locate the symptom in the
following table and take the indicated action.
2-2
Action
Replace the Code Module and/or system board.
Replace the Code Module and/or system board.
Replace the Code Module and/or system board.
Go to the
"Transport Service Check" on page
Replace the Code Module and/or system board.
Go to the
"Transport Service Check" on page
Replace the Code Module and/or system board.
2-4, locate the symptom and take the indicated
2-15.
2-15.
"Symptom