Kenmore 116.33912 Owner's Manual page 8

Hide thumbs Also See for 116.33912:
Table of Contents

Advertisement

Available languages

Available languages

HANDLE MOUNTED
To start the vacuum cleaner, slide the
ON/OFF/CARPET
switch from the OFF
position to the FLOOR or CARPET
position.
To stop the vacuum
cleaner, slide the
ON/OFF/CARPET
switch to the OFF position.
CAUTION
Refer to your carpet manufacturers
cleaning recommendations.
Some
more delicate carpets may require that
they be vacuumed
with the agitator
turned off, to prevent carpet damage.
OFF -turns both suction and brush motors off.
FLOOR - turns on the suction motor only. In
this position the brush assembly
does not
revolve.
Use this setting for cleaning
hard-
wood and tile floors and when
any attach-
ments
(tools)
are used.
CARPET
- turns on both the suction and
the brush motors.
!
r.V CAUTION
Do not allow vacuum cleaner to
remain in one spot for any length of
time when the agitator is turning.
Damage to carpet may occur.
I
OFF
FLOOR
Window
Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand.
Note: The agitator will not rotate if the vacu-
um cleaner is in the upright position.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

116.33913

Table of Contents