Use Lightning Arrester - TP-Link TL-SF1016DS Installation Manual

When equipotential bonding, please note that the cable should be copper wrapped
Kelly with its area being 6mm
grounding bar to establish an equipotential bonding point.
Note: The equipotential bonding cable is not provided with our product. If needed,
please self purchase it.
112

Use Lightning Arrester

Power lightning arrester and signal lightning arrester are used for lighting protection.
Power lightning arrester is used for limiting the voltage surge due to a lightning. If an
outdoor AC power cord should be directly connected to the device, please use a power
lightning arrester.
Note: Power lightning arrester is not provided with our product. If needed, please self
purchase it.
Grounding Terminal Equipotential Bonding Cable
Ground Cable Grounding Bar
Figure 3-3 Equipotential Bonding
2
at least. The shorter cable the better, and use a
10/100Mbps Fast Ethernet Switch
Lightning Protection 13