SF1048 16/24/48-port 10/100M Switch for assistance. Chapter 1: Introduction of the Product This chapter describes the features of the model of TL-SF1016/TL- SF1024/TL-SF1048 16/24/48-port10/100M Switch. TL-SF1016, TL-SF1024, and TL-SF1048 just differ in the number of LED indicators and ports, all figures in this guide are of TL-SF1024.
19” rack-mountable steel case of Electronic Industries Association. Power off all the equipment connected to the Switch before mounting it in the rack, then rivet the two “L” brackets onto each side of the Switch, and fasten it with screws in the rack. TL-S F102...
Power on The TL-SF1016/TL-SF1024/TL-SF1048 16/24/48-port 10/100M Switch is powered by an AC Power Supply. Connect the Switch and power outlet by power cord. Powering on the Switch, it will be automatically initialized and the LED indicators should respond as follows: All of the LED indicators will flash momentarily for one second, which represent a resetting of the system.
Make sure the connected device is turned on and working well. Ø The cable must be less than 100 meters long(328 feet). Ø Appendix C: Contact Information For help with the installation or operation of the TP-LINK TL-SF1016/TL- SF1024 /TL-SF1048 16/24/48-port 10/100M Switch, please contact us. E-mail: support@tp-link.com Website: http://www.tp-link.com...