TP-Link TL-SF1016DS Installation Manual page 6

10/100Mbps Fast Ethernet Switch
LEDs
10/100Mbps RJ45 Port
The front panel of The TL-SF1024 is shown as the following figure.
LEDs
10/100Mbps RJ45 Port
The front panel of The TL-SF1024D is shown as the following figure.
LEDs
10/100Mbps RJ45 Port
The front panel of The TL-SF1048 is shown as the following figure.
LEDs
10/100Mbps RJ45 Port
LEDs
LED
Power
Link/Act
100Mbps
Note: Because of the difference among the switch models, some switches don't have
the 100Mbps indicator, such as TL-SF1048, TL-SF1016DS and TL-SF1024D switch.
Introduction
02
Figure 1-2 Front Panel of TL-SF1016DS
Figure 1-3 Front Panel of TL-SF1024
Figure 1-4 Front Panel of TL-SF1024D
Figure 1-5 Front Panel of TL-SF1048
Status Indication
On The switch is powered on
Off The switch is powered off or power supply is abnormal
Flashing Power supply is abnormal
A device is linked to the corresponding port
On
Data is being transmitted or received
Flashing
Off There is no device linked to the corresponding port
On The corresponding port is running at 100Mbps
There is no device linked to the corresponding port or
Off
the port is running at 10Mbps