Chapter 2 Installation; Package Contents; Safety Precautions - TP-Link TL-SX3008F Installation Manual

JetStream L2/L2+ Managed Switch

Chapter 2 Installation

2.1

Package Contents

Make sure that the package contains the following items. Please contact your distributor, if any of
the listed items is damaged or missing. The figures are for demonstration only. The actual items may
differ in appearance and quantity from the depicted.
2.2

Safety Precautions

To avoid any device damage and bodily injury caused by improper use, you should observe the
following rules.
Safety Precautions
■
Keep the power off during the installation.
■
Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good skin contact and is
■
well grounded.
Use only the power cord provided with the switch.
■
Make sure that the supply voltage matches the specifications indicated on the rear panel of the
■
switch.
Ensure that the switch is installed in a well-ventilated environment and its ventilation hole is not
■
blocked.
Do not open or remove the cover of the switch.
■
Before cleaning the device, cut off the power supply. Do not clean it by the waterish cloth, and never
■
use any other liquid cleaning method.
Place the device with its bottom surface downward.
■
Site Requirements
■
Temperature/Humidity
12 Installation
One Switch
Installation Guide
One Power Cord and One
Console Cable
Mounting Brackets, Screws
and Rubber Feet