Use Lightning Arrester - TP-Link JetStream T1500G-10MPS Installation Manual

Smart PoE+ Switch
The figure below illustrates how to practice equipotential bonding in a network.
When equipotential bonding, please note that the cable should be copper wrapped
Kelly with its area being 6mm
grounding bar to establish an equipotential bonding point.
Note: The equipotential bonding cable and ground cable are not provided with our
product. If needed, please self purchase it.
3.4

Use Lightning Arrester

Power lightning arrester and signal lightning arrester are used for lighting protec-
tion.
Power lightning arrester is used for limiting the voltage surge due to a lightning. If
an outdoor AC power cord should be directly connected to the device, please use a
power lightning arrester.
Note: Power lightning arrester is not provided with our product. If needed, please
self purchase it.
Signal lightning arrester is used to protect RJ45 ports of the device from lightning.
When cabling outdoors, please install a signal lightning arrester before connecting
the cable to the device.
14 Lightning Protection
Grounding Terminal Equipotential Bonding Cable
Ground Cable Grounding Bar
Figure 3-3 Equipotential Bonding
2 at least. The shorter cable the better, and use a