Printer - Panasonic MEW01 351 Planning Manual

Panasonic Electric Works Nordic AB
MEW01351 Rev: -
7
Planning Instructions Fire alarm system EBL512 G3, V1.1.x

Printer

The control unit type 5000 can be with or without a printer depending
on if "PRN" is added in the article number or not. It is mounted on the
front panel door and is connected to the MMI board 5011. See
drawing 512 G3 – 01, sheet 2/2.
When the printer is mounted, the checkbox "Printer" has to be marked
in the WinG3 "Control unit properties" dialog box.
The following will / can be printed:
 Alarms (Fire alarms – incl. test mode alarms & Heavy smoke /
heat alarms, etc.)
 Disablements, etc. via menus H4/U1 – U2
 Detectors activating service signal via menu H4/U5
 The event log via menu H4/U6
 The control unit configuration via menu H4/U7
 Activated Interlocking inputs via menu H9/C1
The printer only – not the mounting frame - is available as a spare
part, type number 5058.
35