Department Range Report; Z1 And X1 Financial Report - Olivetti ECR 2400 Instructions Manual

Depar Depar tment Range Repor tment Range Report t t t t tment Range Repor
Department Range Repor Depar Depar tment Range Repor
The Department Range Report lists the transaction information
pertaining to a defined range of departments. It provides the total sales
transactions performed by the departments within the defined range.
Proceed as follows to print an example Department Range Report
starting with Department 01 and ending with Department 06.
1. Turn the control key to the X position.
2. Type the manager password if it has been defined.
3. Type [01] to define the start department followed by [06] to define
the end department.
4. Press the [Amt Tend/TOTAL] key.
Start department
End department
Z1 and X1 Financial Repor Z1 and X1 Financial Report t t t t Z1 and X1 Financial Repor
Z1 and X1 Financial Repor Z1 and X1 Financial Repor
The Z1 and X1 financial report gives the totals of all the transactions
performed by the cash register. The only difference between a Z1 and
X1 report is that the Z1 report resets all totals to zero, and therefore can
be used as an end-of-day report.
Proceed as follows to print a Z1 or X1 financial report:
1. Turn the control key to the Z or X position (bearing in mind that a Z
printout resets all totals to zero).
2. Enter the manager password if it has been defined.
3. Press the [Amt Tend/TOTAL] key.
A sample Z1 financial report printout is provided in the next section.
Sample Z1 or X1 Financial Report t t t t Sample Z1 or X1 Financial Repor Sample Z1 or X1 Financial Repor Sample Z1 or X1 Financial Repor Sample Z1 or X1 Financial Repor
Shown on the next page is an example Z1 financial report. Printing a
Z1 report resets all totals to zero.
Department range
sales totals
63