5. Pvr Settings - Shaw HDDSR 600 User Manual

The video settings menu is explained on page 2. You can use the Test Pattern contained in this
menu to help calibrate your TV.
This menu contains Open Source Scan attribution information and legal text.
The System Status menu displays a variety of diagnostic information about your receiver,
including signal strength on each tuner, authorization status, current software version, and more.
From 8. PVR Settings, you can enable or disable the Live Record to Disk (LOD) buffer, as well as
adjusting how far the receiver skips forward or back when these keys are pressed.
10E. "5. PVR SETTINGS"
The following options and status fields are available in
•
START EARLY WHEN POSSIBLE/END LATE WHEN POSSIBLE [OFF, 1-5 MINUTES]:
apply globally to all of your Recording Events. A start early or end late buffer set here will
only activate "when possible", such as when a tuner is scheduled to be free before or
after a recording event. You can also add buffers to specific Recording Events by using
the PVR Options menu, as explained on page 29.
• PVR HISTORY [0-90 DAYS]:
before your HDPVR records the same episode again.
•
ESATA HARD DRIVE: Indicates external hard drive status, showing "Connected",
"Disconnected", or "Not In Use". Refer back to section 8 for more information.
• EXTERNAL HARD DRIVE SETUP:
any warnings or instructions related to your external hard drive. If you accidentally
remove these, you can re-launch them by selecting this button.
5. VIDEO SETTINGS
6. OSS ATTRIBUTIONS
7. SYSTEM STATUS
8. PVR SETTINGS
PVR Settings:
The PVR History setting determines how much time must pass
After a reboot, your HDPVR 630 will automatically display
These settings will
45