Playing Back Your Recordedp; Playback Controls - Shaw HDDSR 600 User Manual

6B. PLAYBACK CONTROLS
After selecting "Watch this recording", you can control playback just like a DVD by using the
playback keys on the remote control:
2 Pressing PAUSE will pause playback at the current position. Press PAUSE or PLAY to resume
playback.
5 6 Use REWIND and FAST FORWARD to move backwards or forward through the recording.
There are three fast forward and rewind speeds available, press the button again to move to the
next speed.
You can play back your recordings in slow motion by pressing PAUSE and
then REWIND or FAST FORWARD. There are 2 slow motion speeds
available, press the button again to move to the next speed.
1 Pressing PLAY will always resume playback when paused or if you are rewinding or fast
forwarding. Pressing PLAY while the recording is playing back will display the playback bar, so
you can see where you are in the recording.
If you want to jump to a specific point in the recording, Absolute Jump
allows you to do just that. Use the number keys to enter the point you want
to jump to, and then press PLAY to move to that location. For example,
pressing 4, 5, PLAY will move you to 45:00 in the program!
9 0 The SKIP BACK and SKIP AHEAD buttons skip 10 seconds back and 30 seconds ahead.
These durations can be customized by pressing OPTIONS, 4, 8, 1.
For ultimate control, use the Absolute Skip feature. Press a number on the
remote control, immediately followed by SKIP BACK or SKIP AHEAD to
move that number of minutes in the recording. For example, pressing 2,
SKIP AHEAD will advance you 2 minutes, perfect for bypassing unwanted
sections in your programs.
Use the ENTER button to bring up the Info Banner for the current program. The current date
and time, as well as information for the program you are watching will be displayed.
36