Shaw HDDSR 600 User Manual page 48

There are 3 submenus available from Installation Settings.
• 1. TUNE SATELLITE SIGNAL:
signal level, along with information on signal strength, transponder and services being
decoded.
• 2. REMOTE CONTROL ADDRESS:
HDDSR 605 has a range of approximately 150+ feet. If there are other satellite receivers
in the vicinity, you may need to change your remote control address to prevent a different
remote from controlling your receiver. Refer to the manual that came with your remote
control or the instructions at
•
3. REPORTBACK: If you are activated for Instant PPV, your satellite receiver will
automatically reportback to Shaw Direct using the telephone line to ensure you are always
up to date and able to order new movies. If you would like to force a reportback
manually, ensure your phone line is connected and use this screen.
•
4. CSS: This menu is for Installer use only. Adjusting these settings may result in a loss of
satellite signal.
There are 2 submenus available from Closed Captioning.
• 1. CC CONTROL: Allows you to enable Closed Captions decoded by the satellite receiver.
Captions provided by the receiver do not appear over the onscreen menus, whereas those
provided by the TV will. You can also switch between "Auto Settings" in which the
default text style and settings are used, or "User Settings" to customize how the Captions
look.
•
2. CC USER SETTINGS: If you have selected "User Settings" in the CC Control menu, you
can access CC User Settings where a variety of settings can be changed, including
Service Selection, Font, and Background and Foreground Colours.
You can quickly enable and disable Closed Captions at any time by
pressing HELP, C.
3. INSTALLATION SETTINGS
Provides a loud audible beep and visual indicator of the current
The UHF remote control provided with your HDPVR 630 or
www.shawdirect.ca to learn how to change the address.
4. CLOSED CAPTIONING
44