NewAir AC-10100E Owner's Manual page 8

Control panel
%
%
®
f
\
@
1. Automatic mode indicator
2. Cooling mode indicator
3. Fan (ventilation) mode indicator
4. Mode selection button
5. Timer operation indicator
6. Timer button
7. Full water tank indicator
8. Temperature increase button
9. Display window
10. Remote control receiver
11. ON/OFF (power) button
12. High fan speed indicator
13. Low fan speed indicator
14. Fan speed (ventilation) button
15. Sleep mode indicator
16. Sleep button
17. Compressor indicator
18. Temperature decrease button
Turning the Unit On and Off:
1. Press ON/OFF button. The unit will start automatically. The default temperature is 75°F. If
the ambient temperature is:
• Higher than 74°F (23°C), the unit will work in cooling mode.
• Higher than 68 °F (20°C) but below or equal to 74°F (23°C), the unit will work in
ventilation mode.
• Below 68 °F (20°C), the unit will work in heating mode (this is for cooling & heating
models only),
.
At this time, the indicator lights will show any functions that are in progress. Please note
that the display window will only show ambient room temperatures ranging from 32°F to
122°F (0°C to 50°C).
3. To turn the unit off, press ON/OFF button again.