Secondary Ap Controller - ZyXEL Communications NWA-3160 User Manual

Chapter 3 Tutorials
Access the Web Configurator of the NWA. Go to MGNT MODE to open the
1
following screen.
Figure 46 Tutorial: MGNT Mode (AP Controller)
Select AP Controller and click Apply.
2
The device reboots. You need to log in again to the Web Configurator.
3

3.6.4.1 Secondary AP Controller

The secondary AP controller is simply a backup of the primary AP controller. It
takes over the management of APs covered by the primary controller AP as soon
as the secondary controller AP fails to detect the primary AP controller's presence.
This happens when the primary controller AP is disconnected from the network,
rebooting or turned off.
Note: While the primary controller AP is online, the secondary controller AP cannot
configure any of the managed APs. However, it still has to be turned on to
synchronize with the primary controller AP's latest settings.
To set your NWA in secondary controller AP mode, open the Controller >
1
Redundacy screen (this screen only appears when the NWA is in Controller AP
mode) in the Web Configurator of the NWA that you want to serve as backup.
Figure 47 Tutorial: Secondary Controller AP
Enable Redundancy. Then select Secondary AP Controller and click Apply.
2
68
NWA-3160 Series User's Guide