ZyXEL Communications NWA-3160 User Manual page 238

Chapter 20 VLAN
Under Control, select Fixed to set the port as a member of the VLAN.
7
Figure 142 VLAN-Aware Switch - Static VLAN
Click Apply. The following screen displays.
8
Figure 143 VLAN-Aware Switch
Click VLAN Status to display the following screen.
9
Figure 144 VLAN-Aware Switch - VLAN Status
Follow the instructions in the Quick Start Guide to set up your NWA for
configuration. The NWA should be connected to the VLAN-aware switch. In the
above example, the switch is using port 1 to connect to your computer and port 2
to connect to the NWA:
In the NWA web configurator click VLAN to open the VLAN setup screen.
1
Select the Enable VLAN Tagging check box and type a Management VLAN ID
2
(10 in this example) in the field provided.
238
Figure 141 on page 237.
NWA-3160 Series User's Guide