Xerox Work Centre PE114e User Manual page 117

Condition
Character Voids
Horizontal stripes
Curl
Suggested solutions
Character voids are white areas within the parts of
characters that should be solid black:
• If you are using transparencies, try another type of
transparency. Due to the composition of the transparency,
some character voids are normal.
• You may be printing on the wrong side of the paper. Remove
the paper and turn it around.
• The paper may not meet paper specifications. See "Paper
Specifications" on page A.5.
If horizontally aligned black streaks or smears appear:
• The toner cartridge may be installed improperly. Remove and
reinsert the cartridge.
• The toner cartridge may be defective. Remove the toner
cartridge and install a new one. See "Replacing the Toner
Cartridge" on page 6.8.
• If the problem persists, the machine may require repair.
Contact a service representative.
If the printed paper is curl or paper does not feed into the
printer:
• Turn the stack of paper over in the paper tray. Also try
rotating the paper 180° in the paper tray.
• Try printing to the rear output slot.
T 7.17
ROUBLESHOOTING
7