Router Password - Motorola 2247-N8 User Manual

Pinhole Entry
Protocol - Choose UDP or TCP
External Port Range - Enter a single port where traffic will be received by the 2247-N8 from the Internet.
Internal Address - Enter the private IP address of a device on the 2247-N8 local area network where traffic for this pinhole will be
directed.
Internal Start Port - Enter a single port where traffic will be destined from the 2247-N8's LAN to the Internet.
Add this pinhole - Click this button to add the pinhole entry. You can edit or remove an entry from the Pinhole List located directly
above the Pinhole Entry section of the Web page.
a separate pinhole entry is needed for each port that you wish to open. Pinhole entries are also specific to the protocol chosen.
Note:
Help
Click the link while visiting the NAT Configuration Web page for additional information. Click

Router Password

The 2247-N8 allows two methods of access: restricted and unrestricted. Select the access method from the Router Password page.
Unrestricted LAN Access
2247-N8 configuration without providing a password.
www.motorola.com/us/support
Please visit
Router Password Page
- When the check box is selected, any device on the local area network can access and make changes to the
for FAQs and additional product documentation.
Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Apply Changes to save your updates.
28