Motorola 2247-N8 User Manual page 46

Q: I forgot my password, how can I access my 2247-N8?
A: Remember to use "admin" as your username. If you don't remember the password, the only way to access the 2247-N8 is to reset it following
the steps below:
1. Refer to the diagram at right, and find the round Reset button open-
ing.
2. Carefully insert the point of a pen or an unwound paperclip into the
opening. Press and hold the recessed button:
If you press the button for less than half a second, the unit will
continue to run as normal.
If you press the button for more than 15 seconds, when you
release it, the 2247-N8 will perform a factory reset, clear all set-
tings and configurations, and reboot.
Q: Can I change the wireless network (SSID) name on my 2247-N8?
A: Yes, log in to the 2247-N8 and follow the steps below to change the SSID name.
Configure
1. Click on the
Wireless
2. Click on the
Multiple SSID
3. Click on the
Configure settings for:
4. Use the
5. In the SSID Name field, enter an SSID name of up to 32 characters. Numbers, letters, and spaces are allowed.
6. Click the Apply Changes
You will need to reconnect all wireless devices to the network after changing the network name (SSID).
www.motorola.com/us/support
Please visit
link located on the left side of the screen.
link
link.
pull-down menu to choose the SSID that you want to rename (the default SSID is "SSID1").
button to save the update to the 2247-N8.
for FAQs and additional product documentation.
Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Factory Default ("Reset") Button
To make sure the 2247-N8 Gateway returns to the factory
Note:
defaults you must hold the reset button for more than 15 seconds. When
you release it, the 2247-N8 will perform a factory reset, clear all settings
and configurations, and reboot. Keep in mind that all of your settings will
need to be reconfigured. Follow the steps in
Setup" on page 8 or "Wired (Ethernet) Network Setup"
reconfigure your 2247-N8.
"Wireless (Wi-Fi) Network
on page 13 to
45