Calling An Ais Target - Garmin GPSMAP 420 Owner's Manual

To make an individual routine call:
1. While viewing a chart, press
DSC List.
2. Select the station to call from the list.
Review Call with
3. Select >
4. Select Send to send the information about the call to the radio.
5. On your Garmin VHF radio, select Call.

Calling an AIS Target

When you connect your Garmin chartplotter to a Garmin VHF
NMEA 2000-compatible radio, you can use the chartplotter interface
to set up an individual routine call to an AIS target. For more
information on selecting a channel other than the default channel
(Channel 72), see (page 52).
To make an individual routine call to an AIS target:
1. While viewing a chart, use the
target .
2. Select AIS Vessel > Call with
3. Select Send to send the information about the call to the radio.
4. On your Garmin VHF radio, select Call.
GPSMAP 400/500 Series Owner's Manual
MENU > Other Vessels > DSC
Radio.
Rocker to select an AIS
Radio.
>
Digital Selective Calling
5