Placing An Individual Routine Call; Calling An Ais Target - Garmin GPSMAP 4212 Owner's Manual

To show or hide the trail line for a specific vessel that is sending position reports:
1. From the Home screen, select
2. Select the vessel from the list, and then select Review.
3. Select Trail to show or hide the trail for the vessel on the Navigation chart.
To change the symbol and color of the trail line for a vessel:
1. From the Home screen, select
2. Select any call from that vessel from the list, and then select
3. Select an option:
• Select Symbol to edit the symbol.
• Select Trail Line

Placing an Individual Routine Call

When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you
can use the chartplotter interface to set up an individual routine call. When setting up an individual
routine call from your chartplotter, you can select one of the channels listed below on which you
want to communicate. The radio transmits this request with your call.
The selection of a DSC channel is limited to those channels that are available in all frequency bands:
6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77.
NOTE: The default channel is 72. Select
select a different channel, the chartplotter will use that channel for subsequent calls until you change the
channel and make another call.
To make an individual routine call:
1. While viewing a chart, select
2. Select the station to call from the list.
3. Select Review > Call with
4. Select Send to send the information about the call to the radio.
5. On your Garmin VHF radio, select Call.
NOTE: When initiating a call from the chartplotter, if the radio does not have an MMSI number
programmed, the radio will not receive call information.

Calling an AIS Target

When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you
can use the chartplotter interface to set up an individual routine call to an Automatic Identification
System (AIS) target. For more information on selecting a channel other than the default channel
(Channel 72), see "Placing an Individual Routine Call"
To make an individual routine call to an AIS target:
1. While viewing a chart, select an AIS target
2. Select AIS Vessel >
3. Select Send to send the information about the call to the radio.
4. On your Garmin VHF radio, select Call.
GPSMAP 4000 Series Owner's Manual
Information >
Information >
to edit the line color.
Channel
Menu Other Vessels
>
Radio.
Call with Radio.
DSC List.
DSC List.
Review
to select a different channel from the list. If you
DSC List.
>
(page 57)."
.
Digital Selective Calling
> Edit.