Creating And Using Waypoints - Garmin GPSMAP 420 Owner's Manual

Where To?

Creating and Using Waypoints

You can store up to 1,500 waypoints (3,000 waypoints for models
GPSMAP 421/451/521/551/526/556, including "s" models) with a
user-defined name, symbol, depth, water temperature, and comment
for each waypoint.
To create a new waypoint:
1. From the Home screen, select
2. Use the map pointer ( ) to select the location you want to
designate as a waypoint.
3. Press SELECT.
4. Select Create Waypoint.
To mark your current location as a waypoint:
From any screen, press the
• Edit Waypoint—designate a specific name, symbol, water
depth, or water temperature.
• Delete—deletes the waypoint.
• Man Overboard—designates the current location as a Man
Overboard location.
• Right or Left Arrow—switches between waypoint information
and the Navigation chart.
NOTE: Selecting MaRK
location.
4
Charts > Navigation Chart.
MARK
key.
creates a waypoint only at your present
To edit an existing waypoint:
1. From the Navigation chart, use the map pointer (
the waypoint on the Navigation chart.
OR
From the Home screen, select
Waypoints.
2. Select the waypoint you want to edit.
3. Select Edit Waypoint.
4. Select the waypoint attribute you want to change (Name,
Symbol, Depth, Water Temp, Comment, or Position).
To move the waypoint on the Navigation chart:
1. Select the waypoint on the Navigation chart.
2. Select Review. (The Review button is only shown when more
than one waypoint is in the vicinity.)
3. Select the button for the waypoint you want to edit.
4. Select Move.
5. Press SELECT to save the new location, or press
cancel the move.
To view a list of all waypoints:
From the Home screen, select
Waypoints.
) to highlight
Information > User Data
MENU
Information > User Data
GPSMAP 400/500 Series Owner's Manual
>
to
>