Making An Individual Routine Call; Making An Individual Routine Call To An Ais Target; Gauges And Graphs; Viewing The Gauges - Garmin GPSMAP 7400 Series Owner's Manual

Making an Individual Routine Call

NOTE: When initiating a call from the chartplotter, if the radio does not have an MMSI number programmed, the
radio will not receive call information.
1 Select Info > DSC List.
2 Select a vessel or a station to call.
3 Select Review > Call with Radio.
4 If necessary, select Channel, and select a new channel.
5 Select Send.
The chartplotter sends information about the call to the radio.
6 On your Garmin VHF radio, complete the call.

Making an Individual Routine Call to an AIS Target

1 From a chart or 3D chart view, select an AIS target.
2 Select AIS Vessel > Call with Radio.
3 If necessary, select Channel, and select a new channel.
4 Select Send.
The chartplotter sends information about the call to the radio.
5 On your Garmin VHF radio, complete the call.
The gauges and graphs provide various information about the engine and environment. To view the information,
a compatible transducer or sensor must be connected to the network.

Viewing the Gauges

1 Select A/V, Gauges, Controls.
2 Select a gauge.
3 Select or to view a different gauge page.

Changing the Data Shown in a Gauge

1 From a gauges screen, hold a gauge.
2 Select Replace Data.
3 Select a data type.
4 Select the data to display.
108

Gauges and Graphs

Gauges and Graphs