Placing An Individual Routine Call; Calling An Ais Target - Garmin GPSMAP 4010 Owner's Manual

Digital Selective Calling
To show or hide the trail line for a specific vessel that is sending position reports:
1. From the Home screen, select
2. Select the vessel from the list, and then select Review.
3. Select Trail to show or hide the trail for the vessel on the Navigation Chart.
To change the symbol and color of the trail line for a vessel:
1. From the Home screen, select
2. Select any call from that vessel from the list, and then select
3. Select Symbol to edit the symbol, or select

Placing an Individual Routine Call

When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you
can use the chartplotter interface to set up an individual routine call. When setting up an individual
routine call from your chartplotter, you can select one of the following channels on which you want
to communicate. The radio transmits this request with your call.
The selection of a DSC channel is limited to those channels that are available in all frequency bands:
6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77.
NOtE: The default channel is 72. However, select
If you select a different channel, the chartplotter will use that channel for subsequent calls until you call
using a different channel.
To make an individual routine call:
1. While viewing a chart, select
2. Select the station to call from the list.
Review Call with
3. Select >
4. Select Send to send the information about the call to the radio.
5. On your Garmin VHF radio, select Call.

Calling an AIS Target

When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you
can use the chartplotter interface to set up an individual routine call to an Automatic Identification
System (AIS) target. For more information on selecting a channel other than the default channel
(Channel 72), see "Placing an Individual Routine
To make an individual routine call to an AIS target:
1. While viewing a chart, select an AIS target
2. Select AIS Vessel >
3. Select Send to send the information about the call to the radio.
4. On your Garmin VHF radio, select Call.
52
Information >
Information >
Trail Line
Menu > Other Vessels
Radio.
Call with Radio.
DSC List.
DSC List.
Review > Edit.
to edit the line color.
Channel to select a different channel from the list.
> DSC List.
Call."
.
GPSMAP 4000/5000 Series Owner's Manual
®