Table of Contents
Advertisement
5. T
ECHNICAL
Product
Maintenance
Mini Kinta™ User Manual (Rev. 2)
I
NFORMATION
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source's life and mechanical wear. To maintain optimum
performance and minimize wear, clean the product at least twice a month. However,
usage and environmental conditions contribute to increased cleaning frequency.
To clean the product, follow the instructions below:
•
Unplug the product from power.
•
Wait until the product is at room temperature.
•
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
•
Clean all glass surfaces with a mild soap solution, ammonia-free glass cleaner, or
isopropyl alcohol.
•
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
•
Softly wipe any dirt or grime to the outside edges of the glass surfaces.
•
Gently polish the glass surfaces until they are free of haze and lint.
Always dry the glass surfaces carefully after cleaning them.
Do not spin the cooling fan using compressed air because you could damage it.
Page 13 of 15
Hide quick links:
Advertisement
Table of Contents
