Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet Mini Kinta User Manual

4. O
PERATION
Control Panel
To access the control panel functions, use the four buttons located underneath the
display.

Operation

Menu Map

Configuration
(DMX)

Starting Address

Page 10 of 15
Button
<MENU> Selects an operation mode or to backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN> Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Programming
Mode
Steps
DMX Mode Addr A001~A512 Selects the DMX starting address
Slave Mode SLnd
Auto/Sound
Auto
Mode
G000~G255
Color Control
b000~b255
CoLo
& Strobe
U000~U255
LEDs on/off LEd
Display
diSP
Inversion
Software
uEr
Version
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The Mini Kinta™ uses up to 3 DMX channels in 3-CH DMX mode, which defines the
highest configurable address to 510.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until Addr shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
Function
Description
SL-1~SL-2 Selects slave mode (1 or 2)
Aut Preset automatic show with sound-active mode
r000~r255
Adjusts individual colors (red, green, blue, white)
0~100%
Str1~Str3 Strobe at three preset speeds (slow to fast)
on
Turns LEDs on or off
oFF
dSiP Inverts Display
u1 Shows currently installed software version
Mini Kinta™ User Manual (Rev. 2)