1
speaker cable
14. Turn the top-cover assembly over.
15. Remove the three screws that secure the I/O board to the top cover.
16. Carefully ease the connectors on the I/O board out of the slots in the top cover, and lift the I/O board off the top cover.
1
screws (3)
3
top cover
Replacing the I/O Board
1. Follow the instructions in
Before You
2. Align the connectors on the I/O board with the slots on the top cover and place the I/O board on the top cover.
3. Press the I/O board down to connect it to the system-board connector.
4. Replace the three screws that secure the I/O board to the top cover.
5. Connect the speaker cable to the connector on the I/O board.
6. Follow the instructions from
7. Replace the bluetooth card (see
8. Replace the Mini-Card(s) (see
9. Replace the display assembly (see
10. Replace the keyboard (see
11. Replace the palm-rest assembly (see
12. Replace the optical drive (see
13. Follow the instructions in
step 5
14. Replace the memory module(s) (see
15. Replace the module cover (see
16. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
2
I/O board
Begin.
step 11
to
step 15
in
Replacing the Top
Replacing the Bluetooth
Card).
Replacing the
Mini-Card(s)).
Replacing the Display
Assembly).
Replacing the
Keyboard).
Replacing the Palm-Rest
Replacing the Optical
Drive).
in
Replacing the Hard
Drive(s).
Replacing the Memory
Module(s)).
Replacing the Module
Cover).
Battery).
Cover.
Assembly).