3. Connect the Bluetooth-card cable to the system-board connector.
4. Replace the palm-rest assembly (see
5. Replace the optical drive (see
6. Follow the instructions in
step 5
7. Replace the memory module(s) (see
8. Replace the module cover (see
9. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Replacing the Palm-Rest
Assembly).
Replacing the Optical
Drive).
in
Replacing the Hard
Drive(s).
Replacing the Memory
Module(s)).
Replacing the Module
Cover).
Battery).