Specifications - Jensen JIMS-70I User Manual

AC Adaptor is not plugged
into a wall outlet or the
The unit does connector is not plugged
not respond (no into the power supply jack
power). on the back of the unit.
Wall outlet is not
functioning.
iPod/iPhone is not
iPod/iPhone installed properly.
does not
respond to the
speaker system.
Your iPod/iPhone is
locked up.
Unit turned to CD or radio
mode.
iPod/iPhone is not
iPod/iPhone
installed properly.
does not charge.
iPod/iPhone is locked up/
frozen. iPod/iPhone
battery has problem.
Weak FM
FM antenna wire is not
fully extended.
reception
Volume level is set too
high.
Sound is
distorted.
Sound source is distorted.
Unit gets warm
after extended
This is normal.
play at high
volume.
Power Requirement
AC-DC adaptor
Backup Battery
Plug the AC adaptor into a wall outlet and
plug the connector into the supply jack on the
unit.
Plug another device into the same outlet to
confirm the outlet is working.
Remove your iPod/iPhone from the dock and
check for obstruction on the connectors in the
dock and on your iPod/iPhone. Then reseat it
on the dock.
Please make sure that your iPod/iPhone is
working properly before docking into the unit.
Please refer to your iPod/iPhone manual for
info on resetting the iPod/iPhone.
Select other modes for iPod charging.
Remove your iPod/iPhone from the dock and
check for obstruction on the connectors in the
dock and on your iPod/iPhone. Then reseat it
in the dock.
Please make sure your iPod/iPhone is
working properly before docking into the unit.
Please refer to your iPod/iPhone manual for
details on resetting.
Extend or reposition the wire antenna for best
reception.
Decrease the volume.
If the iPod/iPhone original sound source is of
poor quality, distortion and noise are easily
noticed with high-power speakers. Try a
different audio source such as a music CD.
If you are using an external sound source like
older generation of iPod, try reducing the
output volume on the device itself. Also try
turning bass boost OFF or change the EQ
setting.
Turn the unit off for a period of time or lower
volume.

SPECIFICATIONS

Input: 120 V ~ 60 Hz
Output: 5 V 1800 mA
2 x 1.5 V 'AAA' (UM-4)
13