JVC VN-V686UAPI Manual page 67

zoom is Tele edge, focus can be from 0.00 to about 78. When focus is set to auto, easy_auto is returned.
Allowed users admin, operator, user
Moving to Specified Focus Position for VN-V686
Format /api/param?camera.focus=data
Example to move to absolute 50.00
/api/param?camera.focus=50.00
Example to move to relative 5 Near
/api/param?camera.focus=+5.00
Example to move to relative 5 Far
/api/param?camera.focus=-5.00
Example to set to auto
/api/param?camera.focus=easy_auto
Example to execute one push auto focus
/api/param?camera.focus=op_auto
Example to change from auto to manual
/api/param?camera.focus=manual
Example of Response camera.focus&200 OK
Interpretation Change focus. To move to absolute position, specify from 0.00 to 99.99. 0.00 means Near edge and
99.99 means Far edge. Specify easy_auto for auto focus. Specify op_auto for one push auto focus. Specify manual for
changing from auto to manual. Auto focus works after pan/tilt/zoom operation. Auto focus does not work after
moving absolute/relative position of pan/tilt/zoom.
Allowed users admin, operator
Focus Operation for VN-V686
Format /api/param?camera.focus.status=data
Example to start zoom
/api/param?camera.focus.status=start
Example of Response camera.focus.status&200 OK
Interpretation Start or stop focus operation. Specify start or stop.
Allowed users admin, operator
Setting Direction of Focus Operation for VN-V686
Format /api/param?camera.focus.mode=data
Example to set to Far
/api/param?camera.focus.mode=far
Example of Response camera.focus.mode&200 OK
Interpretation Set direction of focus operation. Specify far or near.
Allowed users admin, operator
Setting Speed of Focus Operation for VN-V686
Format /api/param?camera.focus.speed=data
Example to set maximum speed
/api/param?camera.focus.speed=100
Example of Response camera.focus.speed&200 OK
67