Table of Contents
Advertisement
Setting Iris for VN-V686
Format /api/param?camera.iris=data
Example to set fixed value /api/param?camera.iris=50
Example to set auto /api/param?camera.iris=autoM
Example to change from auto to maual /api/param?camera.iris=manual
Example of response camera.iris&202 Accepted(camera(num).status=save or
camera.motion.auto_pan.image=save)
Interpretation Change iris setting. Specify 0 to 100 to set fixed value. 100 means full open. Specify "autoL",
"autoM" or "autoH" to set auto. Specify "manual" to change from auto to manual. Current manual value is saved to
preset position by the API, camera(num).status=save. Current manual value is saved to Auto Pan and Auto Trace by
the API, camera.motion.auto_pan.image=save. If the change is not saved, the setting is restored by reboot.
Allowed users admin, operator
Setting Iris Direction for VN-V686
Format /api/param?camera.iris.mode=data
Example to open /api/param?camera.iris.mode=open
Example of response camera.iris.mode&200 OK
Interpretation Change direction setting fo iris. Specify "open" or "close".
Allowed users admin, operator
Operating Iris for VN-V686
Format /api/param?camera.iris.status=data
Example to start /api/param?camera.iris.status=start
Example of response camera.iris.status&200 OK
Interpretation Start or stop iris operation. Specify "start" or "stop".
Allowed users admin, operator
Note of White Balance Setting: After power on, White Balance setting of Home position is applied. After moving to
preset position, White Balance setting of the position is applied. During Auto Pan and Auto Trace, White Balance
setting for Auto Pan and Auto Trace is applied. When White Balance setting is changed by API, the change is
temporal. To save current White Balance setting for preset position, use camera(num).status=save. To save current
White Balance setting for Auto Pan and Auto Trace, use camera.motion.auto_pan.image=save.
Getting White Balance from VN-V686
Format /api/param?camera.image.white_balance
Example of response camera.image.white_balance=autoW&200 OK
28
Advertisement
Table of Contents
