Table of Contents
Advertisement
An error code will be returned when setting is not properly performed. Example:
ParamA.ParamB.ParamC&401 Unauthorized
6.2. Camera
These APIs are related to camera settings. Same functions are shown on the Camera page of the WEB setting page
and PTZ Controller of built-in viewer. Refer to the instruction manual for details on the Camera page and PTZ
Controller.
Saving Changes of Camera Settings
Format
/api/param?canera.status=data
Example /api/param?canera.status=save
Example of response
Interpretation Save or cancel changes to camera settings. Specify save or restore. By status=save, changes to
camera settings are saved. If not saved, the changes are restored by power off of VN-V686. By status=restore,
changes to camera settings are restored.
Allowed users admin, operator
Getting Camera ID stored in JPEG from VN-V686
Format
/api/param?camera.id
Example of response
Response example when setting field is left blank
Interpretation Acquire Camera ID comment. This comment is stored in comment segment of JPEG. The Camera
ID is used as sender's display name of alarm mail. If you want to
Mail Address for VN-V686".
Example of response camera.id=Camera01&200 OK
Sender
Camera 01<somename@somecompany.com>
Allowed users admin, operator, user
Setting Camera ID in JPEG from VN-V686
Format /api/param?camera.id=data
Example /api/param?camera.id=Camera01
Example when setting as blank /api/param?camera.id=%00
Example of response
Interpretation Change the camera ID stored in comment segment of JPEG. Maximum size is 40 bytes.
canera.status&200 OK
camera.id=VN-V686&200 OK
camera.id&202 Accepted(camera.status=save)
camera.id =&200 OK
set sender's mail address, s
18
ee "
Setting Sender
Advertisement
Table of Contents
