JVC VN-V686UAPI Manual page 44

specify m1 in the case of Make for alarm input 1.
specify b1 in the case of Break for alarm input 1.
specify m2 in the case of Make for alarm input 2.
specify b2 in the case of Break for alarm input 2.
specify v1 for motion detection of video.
specify ncbws for IR Filter OFF.
specify ncbwe for IR Filter ON.
specify efans for fan stop.
specify camera.position(num).status for preset position. "num" is from 0 to 99.
Setting Example /api/param?application.event(1).trigger=v1
Interval can be set to periodic ftp assigned to event(6). Set "i1500" for interval 1500 seconds.
Setting Example /api/param?application.event(6).trigger=i1500
When setting Trigger upon combining 2 alarm inputs, specify as m1(50)b2. The example above indicates that trigger
will be activated when break is invoked at alarm input 2 within 50 seconds after make is invoked at alarm input 1.
Additionally, combination is only allowed for alarm inputs and not motion detect. And same alarm can not be
combined. For example, m1(50)m1 is not available.
Setting Example /api/param?application.event(1).trigger=m1(100)b2
Allowed users admin, operator
6.5. Alarm Environment Setting
The APIs below are related to alarm environment setting. These are equivalent to the features on the Alarm
Environment page of the WEB setting page. Refer to the instruction manual for details on the Alarm Environment
page.
Getting SMTP Server Address Setting from VN-V686
Format /api/param?application.smtp.host
Example of Response application.smtp.host=192.168.0.200&200 OK
Response example when setting field is left blank application.smtp.host=&200 OK
Interpretation Acquire the address setting of the SMTP server.
Allowed users admin, operator, user
Setting SMTP Server Address for VN-V686
Format /api/param?application.smtp.host=data
Example /api/param?application.smtp.host=192.168.0.200
Example of Response application.smtp.host&200 OK
44